Video Ads P8 LED display billboard,full color rental LED screen
High Quality indoor rental LED Display P8 Cabinet for LED Video Wall
1: CE,UL, ROHS, 3C, ISO,FCC
2: High definition
3: Energy saving 35%
4: Near vision distance
5. low power consumption
Competitive Advantage:
1. Good quality
2. Good price
3. Good 24-hour service
4. Promote delivery
5. Energy saving
6. Accept small orders
7. High structural performance: No wiring is required for each component, module and HUB card, and the module and system can be easily connected without power cord.
8. High-end display effect: high refresh, high grayscale, high color contrast, high quality picture quality.
Specifications :
| outdoor SMD P8 |
| Resolution/mm | 8 |
| Pixel configuration | 1R1G1B |
| Pixel density/pixels/m² | 15625/m² |
| Module resolution | 32x16 |
| Module size/mm | 256x128 |
| View distance | 14-300m |
| Single point brightness adjust | Can be added |
| Single point color adjust | Can be added |
| White balance brightness | >7500cd/㎡ |
| Color temperature | 6500K-9500K |
| Horizontal view angle | 120(degrees) |
| Vertical view angle | 60(degrees) |
| Signal Process bit | 10 or 16bit |
| Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 |
| Control distances | Internet cable:100m, multimembrane:500m, monofilm:2km |
| Driving mode | Constant driving current |
| Scanning mode | 1/4SCANNING |
| Frame rate | 60Hz |
| Refresh frequency | >3000Hz |
| Control mode | Computer synchronous |
| Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted |
| 255 steps. No grey loss |
| Out of control point | <1/10000 |
| Working hours | ≥72hours |
| Mean Time Between Failure | >5000hours |
| Life time | 100000hours |
| Life-all-white(brightness halving) | 50000hours |
| Environment temperature range | Operating temperature range: -20-45℃ |
| Self-check technology | LED spot self-check, communications check, power check, |
| temperature monitor(need customization) |
| Remote monitoring | Remote supervision and control, record potential fault, |
| send out warning signs to the operators.(need customization) |
| Software environment | WindowsNT,Windows1999,WindowsXP |
| Luminous point width between centres | Deviation<3% |
| Brightness uniformity | <10% |
| Color uniformity(chromaticity coordinate) | ±0.003 |
| Power supply request | AC85-264V(50Hz-60Hz) |
| Contrast | (1000:1) |
| System protection | Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration |
| Humidity(working) | working:10-95% |
| Humidity(storing) | storing:10-95% |
Reliability Test
In order to avoid possible defects in design and production, we conduct a series of reliability tests on semi-finished products, such as electronic performance test, dustproof test, waterproof test, anti-corrosion test (salt spray test), vibration test and thermal shock test.
Semi-finished product reliability test: Before gluing the semi-finished product modules, all modules should be aged at high temperature for more than 48 hours, and they can be packaged only after QC inspection.
Finished product reliability test: After assembling the finished module to the LED cabinet, we simulate the assembly of the entire cabinet and age it for more than 72 hours. If no defects are found, we will ship it to the customer.
Waterproof test: In the rainy season, the waterproof performance of outdoor LED display screens is very important. The front cabinets are all tested with high-pressure water spray to ensure that the waterproof test is under good conditions and the protection level can reach IP65
Anti-corrosion test: To ensure the anti-corrosion reliability of PCB boards and cabinets, salt spray tests must be carried out during the production process
Vibration test: For different types of screens, simulated vibration tests must be carried out to ensure the reliability of transportation and handling.
Environmental test: The real outdoor environment can ensure that the factory display effect is consistent with the on-site effect
Quality Management
Implement 5 s site management, general SPC statistical process control methods
Through the ISO9001, CE, ROHS, FCC certification
FAQ
Q1: What is the control system? How is it?
A: We use Nova Taurus Series asynchronous control system. Support cluster play and management. Support APP/Phone/ WIFI/ Ipad/ Laptop/ PC/ Cloud control. It’s very easy and convenient to control.
Q2: Can I have a sample order for led screen?
A: Yes, we welcome sample order to test and check quality. Mixed samples areacceptable.
Q3:Is it OK to print my logo on product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q4: What is your best service?
1: One to one sales engineer to customer responsibility system;
2. Know your project and provide the best solution for it;
3. Track your order and let you know each step and detail of it;
4. Teach you how to install and use the screen;
5. Care the subsequent use of your screen and ensure your after - sales service be well.
Q5. How about your delivery time?
A: Generally, it will take 7-15 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q6:How about your Warranty Term?
A: 2-year warranty. Structure design, installation problem, system problem, how to use the screen…don’t worry, we have professional after-sale team to solve your any questions after you placed an order. And your exclusive sales engineer will also help you get over any problems.
Product Tags:
|
|
Video Advertising Rental Screen P8 LED Display Billboard, Indoor Full Color LED Screen 1/4 Scan Mode Images
|
